Sunday, December 2, 2012

Modification Rectifiers Regulator Motorcycle

by : zakir skynet

This circuit is a trick to add battery power, as we know how to work a regulator rectifier output voltage of 13.5 volts is segregated, if you use this trick then supplies electrical energy to the battery will increase its strength.
advantages trick is:
  • battery in a state of full power
  • can add additional accessories are like HID lights, sirens, audio etc.

Modification adds voltage to 15 volts

Purpose of adding a diode in the negative path is to" lie"  to the zener diode, this will lead to open scr not throw energy into the ground. consequently continue to supply energy to the battery.




Modification Rectifier Regulator Models Three Phase and Single Phase















I hope this information is useful

3 comments:

  1. Ezt a diódás emelést ki is próbáltad élőben? Háromfázisú generátorom van (de nem szeretnék tönkretenni semmit). Hány amperes diódákat érdemes ide berakni? Ha pl. a három soros dióda helyett csak kettőt használok, akkor nem 15V-ra emeli hanem 14.4-re? Vagy hogyan működik ez? Előre is köszi a választ. Üdv...Peti :)

    ReplyDelete
  2. can you make rectifier for 12v 7amp
    i want to add HID lights of honda cg 125

    ReplyDelete
  3. i want to add 65 watt HID on my honda cg 125
    i have 12v 7 amp battery

    ReplyDelete